Skip to content

Model SDH 1452 Core-Winding Machine

Our newest model, the SDH 1452, is capable of producing a much larger core without compromising on quality, speed or reliability.  This makes it the core-winding solution of choice for applications requiring a large-size finished core.

SDH 1452 Features

  • Maximum Winding Speed: 300 Feet (91.44m) per minute
  • Cut thickness: .007 to .014 (.1777mm – .356mm)
  • Cutting Width: 4 inches (101mm) up to 14 inches  (355.6mm)
  • Minimum I.D.: 5 inches (165.1mm)
  • Maximum O.D.: 52 inches (1320.mm)
  • Max Core weight: 1300lbs (589 kg)
  • Dimensions: 84” H; 156” W; 78” D

OPTIONAL FEATURES:

  • Light curtain

The TRANCO Model SD 1452 is a heavy duty winding machine for transformer manufacturers that produces transformer cores with a minimum inside diameter of 6.5 inches (165.1mm) up to a maximum of 52 inches (1320mm) outside diameter.

SDH 1452 Complete Specifications

  • Two servo operation
  • Full PLC motion control system with ability to add up to 2 more servo drives
  • Fused at 40 amps
  • Memory for recipes (can be held in HMI or PLC motion control)
  • 10” Touchscreen HMI
  • Ethernet connectivity for online support
  • Individual IP address available
  • Distributed Gap Cores
  • Toroid Cores (no cuts)
  • Concentric Cores
  • Zig-Zag Cores
  • Flare Cores
  • Machine “STOP” set to either finished diameter, number of sheets or finished weight
  • Programmable overlap of final cut
  • Programmable to finished angle (for Tig welding or strapping)
  • Sheets/Group can be set to any number
  • Sheets/Group automatic increase
  • HMI with continuous monitoring and display of BUILD, SPEED, CYCLE TIME, WEIGHT and number of SHEETS while machine is in RUN mode
  • Additional displays available at customer’s request
  • Additional module space to allow for expandability of discrete I/O for future sensors & controls
  • Ability to interface with external safety devices
  • 300ft/minute speed capability (based on strip width and thickness)
  • Winding speed increase/decrease in increments of 5ft/per min.
  • Any number of books of Gaps can be increased in size to help with forming process
  • Toroid wraps can be added at beginning of cycle to help with forming process
  • Wrap up turns (optional: additional Toroid wraps can be added to the finished Core)
  • Capable of dual strip widths (additional cost)
  • First gap sizing adjustment capability
  • Speed compensation (ability to maintain approximate gap position when winding speed is changed)
  • Gap Offset variable adjustment (allows operator to adjust spacing between gap start positions)
  • Gap Size variable adjustment (allows operator to adjust the gap size as per Core specs)
  • Density Adjustment (operator can adjust Density setting for correct weight parameters)
  • Local language programmable on HMI (translation to be provided by customer)
  • Prewired for multiple safety inputs (Light curtains, safety mats Etc)
  • Prewired for Dereeler fault (If dereeler faults out, Tranco machine will stop simultaneously)
  • Ethernet connectivity for online support.
  • Access for diagnostics by way of an Ewon device.
  • Production reports available through Ewon device
  • Alarm emails available. (These can be sent to Supervisors or Maintenance)
  • Live screen viewing available through the Ewon
  • Air Conditioned Console.
  • High Speed Servo Shear (Steel engagement time, 10ms)

Download printer friendly specifications.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

Related Products

We Will Assist You.
Quick Connect