| Features | SD 1036 | SDH 1452 |
| Maximum Winding Speed: 400 Feet (121.92m) per minute | • | |
| Maximum Winding Speed: 300 Feet (91.44m) per minute | • | |
| Cut thickness: .007 to .014 inches (.1777mm – .356mm) | • | • |
| Cutting Width: 3 inches (76mm) up to 10.5 inches (266mm) | • | |
| Cutting Width: 4 inches (101mm) up to 14 inches (355.6mm) | • | |
| Minimum I.D.: 4.5 inches (114mm) | • | |
| Minimum I.D.: 6.5 inches (165.1mm) | • | |
| Maximum O.D.: 36 inches (915mm) | • | |
| Maximum O.D.: 52 inches (1320.mm) | • | |
| Max Core weight: 850lbs (385kg) | • | |
| Max Core weight: 1300lbs (589kg) | • | |
| Dimensions: 95” H; 108” W; 46” D | • | |
| Dimensions: 84” H; 156” W; 78” D | • | |
| Two servo operation | • | • |
| Two Gearboxes | • | • |
| Full PLC motion control system with ability to add up to 2 more servo drives | • | • |
| Fused at 40 amps | • | • |
| Dual Safety Hand Pads (used to operate machine in manual mode) | • | |
| Memory for recipes (can be held in HMI or PLC motion control) | • | • |
| 10” Touchscreen HMI | • | • |
| Ethernet connectivity for online support | • | • |
| Individual IP address available | • | • |
| Distributed Gap Cores | • | • |
| Toroid Cores (no cuts) | • | • |
| Concentric Cores | • | • |
| Zig-Zag Cores (no cuts) | • | • |
| Flare Cores | • | • |
| Machine “STOP” set to either finished diameter, number of sheets or finished weight | • | • |
| Programmable overlap of final cut | • | • |
| Programmable to finished angle (for Tig welding or strapping) | • | • |
| Sheets/Group can be set to any number | • | • |
| Sheets/Group automatic increase | • | • |
| HMI with continuous monitoring and display of BUILD, SPEED, CYCLE TIME, WEIGHT and number of SHEETS while machine is in RUN mode | • | • |
| Additional displays available at customer’s request | • | • |
| Additional module space to allow for expandability of discrete I/O for future sensors & controls | • | • |
| Ability to interface with external safety devices | • | • |
| Winding speed increase/decrease in increments of 5ft/per min. | • | • |
| Any number of books of Gaps can be increased in size to help with forming process | • | • |
| Toroid wraps can be added at beginning of cycle to help with forming process | • | • |
| Wrap up turns (optional: additional Toroid wraps can be added to the finished Core) | • | • |
| Capable of dual strip widths (additional cost) | • | • |
| First gap sizing adjustment capability | • | • |
| Speed compensation (ability to maintain approximate gap position when winding speed is changed) | • | • |
| Gap Offset variable adjustment (allows operator to adjust spacing between gap start positions) | • | • |
| Gap Size variable adjustment (allows operator to adjust the gap size as per Core specs) | • | • |
| Density Adjustment (operator can adjust Density setting for correct weight parameters) | • | • |
| Local language programmable on HMI (translation to be provided by customer) | • | • |
Celebrating more than 50 years in core-winding solutions